The Cascos C5.5 Synchro 5500kgs lifting capacity, two post vehicle lift is referred to as "the beast". This model is fully baseless and fitted with four three-stage lifting arms all 705mm fully closed, extending to 1335mm fully open. Drive through distance between posts of 2810mm and an extremely low pad pick up height of 105mm..
AXGE Offer Price :
CASCOS C5.5 Syncro Baseless Two Post Lift, 5.5 tonne £10,650.00 + vat (£12,780.00 inc)
Available in three phase as standard, single phase models by special order, plus surcharge.
(A VAT Invoice will be issued with your purchase)
This model is also available in with a solid steel base C5XL Based (see our website)
Note :
Delivery & Installation included at your companies premises.
A site survey will be completed prior to installation.
Customer to supply electrical supply & connection to the lift.
Scottish Highlands & Islands may incur extra delivery costs, please ring before you buy.
NOTE : We offer a Price Promise on all our sales.
Its all about quality.
The Cascos C5.5 Syncro two post vehicle lift is referred to as "the beast". It has a massive 5500kgs lifting capacity, is fully baseless and boasts a 2810mm drive through width between the posts. If that isn't enough, its fitted with four three-stage lifting arms, which when fully closed are only 705mm long but fully open they extend to 1335mm.
Will it fit in my Workshop :
All CASCOS Lifts are manufacture to the highest Quality Standards and include :
"SlenderTec" profile posts, specially designed and hot-rolled, to enable building of lifts with narrow posts that are more resistant to torsion and flex than other lifts that are made with folded sheet metal or similar materials. SlenderTec technology makes the posts impossible to deform they will always look like they did on the day they were installed. Bi-directional Loading of Vehicle (with or without base) :
|
Arm Safety Locks :
Arm safety locks using spindle rod, give lifting arms more positioning possibilities under the car and enabling faster loading times.
Electro-mechanical with a 45mm spindle : The diameter of the spindle used on Cascos lifts is 45 mm, the largest on the market. By using this large spindle size it creates less friction and, therefore, less wear to the "nut to spindle" assembly. Cascos spindles are cold-rolled and not thread cut, this process accredits to the lifts high quality and extended life offered by other manufacturers. The spindles are fully checked individually prior to any assembly commencing. |
Built using only the highest quality materials.
European regulation EN 1493:2010 and the directive 2006/42/EC
All Cascos lifts exceed the standardisation requirements in design quality, materials, manufacturing processes, maintenance and optimum, safe and controlled operation of a lift.
All Cascos lifts include an identifier of the valid EC declaration of conformity, that states that the product complies with the essential European standards and requirements in health and safety in conjunction with its instruction, revision and recommended maintenance books.