Cascos C5XL with base-frame, 5.0 tonne two post lift.

AXGE Offer Price : 

CASCOS C5XL with wide base-frame, Two Post Lift, 5.0 tonne £10,750.00 + vat (£12,900.00 inc) 

This Lift is also available on our Website without a base frame (Model C5.5 Syncro)

Available in three phase as standard, single phase models by special order, plus surcharge. 

(A VAT Invoice will be issued with your purchase) 

Note : Delivery & Installation included at your companies premises. 

A site survey will be completed prior to installation. 

Customer to supply electrical supply & connection to the lift. 

Scottish Highlands & Islands may incur extra delivery costs, please ring before you buy. 

NOTE : We offer a Price Promise on all our sales.

Are you struggling to lift the heavier vans, 4x4's and cars coming through your workshop, then the Cascos C5XL two post lift is probably the lift for you? The C5XL model comes supplied with a wider full steel base for a more stable lifting condition and is the highest quality you would expect from Cascos. Not only does this model  boast a very respectful lifting capacity of 5000kgs it also has a drive-through width of 3130mm between the posts.

Will it fit in my Workshop :

All CASCOS Lifts are manufacture to the highest Quality Standards and include :

"SlenderTec" profile posts, specially designed and hot-rolled, to enable building of lifts with narrow posts that are more resistant to torsion and flex than other lifts that are made with folded sheet metal or similar materials. SlenderTec technology makes the posts impossible to deform they will always look like they did on the day they were installed. Bi-directional Loading of Vehicle : "Slendertec" posts enable cars to be placed on the lift in either direction?  (Most two post lifts have short lifting arms to the front and long lifting arms to the rear to enable easier access to open the car door. When built this way the lift will have different weight limits depending on the cars position) Not a problem with the Cascos you can drive on or reverse on, still have enough room to open the doors and it doesn't matter which direction the vehicle is facing.   Fitted Double-height lifting Pads : Unlike almost every other brand of lift on the market, you are forced to purchase additional lifting pads for vehicles requiring additional reach. The Cascos lifts come as standard with a unique "Double Height System" a telescopic screw within a screw allows you to double-up on the amount of adjustable travel. Arm shown above is the low profile version. Fitted two tool trays for wheel nuts, bolts etc. Comes complete with rubber buffer, door protector. Protection of the spindle thread, prevents user from getting dirty by touching it.

Arm Safety Locks :
Arm safety locks using spindle rod, give lifting arms more positioning possibilities under the car and enabling faster loading times.

Electro-mechanical with a 45mm spindle :  The diameter of the spindle used on Cascos lifts is 45 mm, the largest on the market. By using this large spindle size it creates less friction and, therefore, less wear to the "nut to spindle" assembly. Cascos spindles are cold-rolled and not thread cut, this process accredits to the lifts high quality and extended life offered by other manufacturers.  The spindles are fully checked individually prior to any assembly commencing.

Built using only the highest quality materials. 

_{European regulation EN 1493:2010 and the directive 2006/42/EC}

All Cascos lifts exceed the standardisation requirements in design quality, materials, manufacturing processes, maintenance and optimum, safe and controlled operation of a lift.

All Cascos lifts include an identifier of the valid  EC declaration of conformity, that states that the product complies with the essential European standards and requirements in health and safety in conjunction with its instruction, revision and recommended maintenance books.